Products >>Special LED Tube

Product Name

Microwave Sensor LED Tube

Model

Microwave Sensor LED Tube

Energy efficient with motion sensor;

Working with direct connection of AC 100-240V;

High Power Factor >0.9;

High CRI >80;

Aluminum housing with good heat dissipation.


Features

1. When the lamp detects movement, it will work full range 100% bright. 

2. When movement stops within 10 meters from the center, the tube will work in full range for 1-5 minutes (adjustable) and sets to standby mode. 

3. In standby mode, the tube will turn down with 20% brightness.

4. Sensor control chip built in, and sensitive to human body, animals and vehicles.


1) If the led tube is one side power input, the other side short-circuited, pls kindly install as following:

   Traditional inductance wiring schematic         LED tube wiring schematic  

     

    Step 1 Turn off the power, and take out the old fluorescent tubes

    Step 2 Replace the original starter with the supplied LED starter

    Step 3 Install the LED tube.


2) If it is Two side power input,  that is "L","N" in two sides,pls kindly install as following:

   

                  

Traditional inductance wiring schematic                  LED tube wiring schematic  


   Step 1 Turn off the power, and take out the old fluorescent tubes

   Step 2 Remove the starter.

     Step 3 Install the LED tube.


 

 

 

Xiamen PVTECH Corporation Limited
AddressUnit 28 Yangtai Road, Xinyang Industrial Zone, Haicang District,Xiamen
E-mailsales@pvtech.com.cn skype:xmpvtech
Phone0592- 2658882 / 2658883 Fax0592-2658882-606ICP10026408

35020502000080